Metal-Protection
Industrial Enamel - Spray
The highest quality product formulated for industrial applications:
- Finish your project faster and save money with the high-solids formula
- Excellent coverage in one coat
- Fights corrosion
- Heat and chemical resistant to stand the test of time in a tough environment
- Great adhesion to interior/exterior wood, metal, aluminum and more
Valspar spent many years developing a new high-solids enamel spray to give you the highest quality product available on the market today:
- Saves time and therefore saves money - excellent coverage in one coat
Valspar Industrial Enamel spray paint is heat resistant far beyond what is required in everyday working environments:
- Enamel is heat resistant up to 350ºF (175ºC)
- High Temperature paint up to 1300ºF (700ºC)
Valspar formulas are not only the highest quality, but are formulated to ensure they meet and exceed today's and future chemical directives:
- All Valspar spray paints meet state and federal VOC regulation limits
Valspar products are formulated with consideration for our environment:
- Higher solids = Less cans required for the job
- Less cans used = Better for the environment
- Standard promotional brands may require up to three 16 oz. cans to equal the coverage that one 20 oz. can of Valspar Industrial Enamel provides
Spray paint tips:
- Ensure adequate ventilation at all times
- Wear safety glasses when spraying
- Always shake well, especially higher solids products where there is more pigment
- Use a Primer - promotes better adhesion which aids long-term durability
Product Data Sheets:
Note: Underlined Part Numbers are links to SDS
0-45001-12870-07 -- 0-80047-44209-4
Higher Solid Content = Less Cans Needed
(Better for the environment too)
Excellent Hiding Power
It's easy to see how much better Valspar Industrial Enamel
performs, just look at the hiding cards below.
Unpainted Test Card
Standard Industrial
Valspar Industrial Enamel
Superior Corrosion Resistance
Better than the best rust-preventative spray available. The panels
below spent 200 hours in a salt fog cabinet – the harshest environment
and perfect for this test.
Valspar Industrial Enamel
Leading Competitor
Valspar Industrial Enamel
Leading Competitor
Resistant Against Gasoline
Valspar Industrial Enamel will not be affected by gasoline. The panels below
were allowed to dry, dripped with gasoline and then wiped off.
Valspar Industrial Enamel
Leading Competitor
Product Comparison
Industrial Enamel |
Spray |
Yes |
Excellent |
30-50 minutes |
Within 2 hours OR After 48 hours |
Excellent |
Excellent |
Industrial Enamel |
Brush |
Yes |
Excellent |
3-6 hours |
None |
Excellent |
Excellent |
Armor Anti-Rust |
Spray |
Yes |
Very Good |
30-50 minutes |
Within 4 hours OR After 36 hours |
Very Good |
Very Good |
Armor Anti-Rust |
Brush |
Yes |
Very Good |
3-6 hours |
None |
Very Good |
Very Good |
Tractor & Implement |
Spray |
Yes |
Very Good |
30-50 minutes |
Within 4 hours OR After 36 hours |
Very Good |
Very Good |
Tractor & Implement |
Brush |
Yes |
Very Good |
3-6 hours |
None |
Very Good |
Very Good |
All Purpose Enamel |
Spray |
Yes |
Good |
15 minutes |
Within 1 hour OR After 24 hours |
Good |
Good |